China Hot selling CZPT ZW Series Water Injected Oil Free Screw Air Compressor ZWV15A near me manufacturer

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Click Here

Product Description

 

FUSHENG Stationary Screw Air Compressor
Model: ZWV15A

 

ZW Series Water Injected Oil Free Air Compressors

ZW Series Oil Free Screw Compressors produce totally oil-Less air with a water injected compression process that is completely free of any hydrocarbons. Highly efficient, fixed speed models deliver up to 15% energy savings over dry screw type compressors. Low operating temperatures, slow direct-drive running speeds ensure high reliability with the most advanced air end in the industry.

 

Naturally “Green” by design, each provides high quality air, low dB(A) noise levels, efficient use of energy, and no oil discharge to the environment. Even service costs are very low with no oil filters, oil separators or oil to dispose.

 

ZW’s 4-Stage Water Purification System with reverse osmosis membrane & water pump is furnished standard to remove all contaminants to provide clean, flat water to prevent contamination buildup on the internal components. Total water filtration, cleaning and automatic flushing ensure high air quality and long component life cycles.

 

Our advanced alphanumeric display Controller manages the system and monitors temperatures and pressures to protect your investment and ensure you extract the maximum performance and energy efficiency from every kilowatt you use. When your application requires clean, high quality air count on the ZW Series for truly oil-less air.

 

ZW Compressors are environmentally safe with high efficiency and are an extension of our current offering of Oil Less piston compressors. FS-Curtis oil free compressors serve the majority of your compressed air needs.

 

Variable Speed Driven ZW compressors offer an additional 30-35% energy savings and long life cycle to customers with variable air demand.

Oil-Less Design

  • System contains no oil, unlike dry screw compressors.
  • Water cools, seals and lubricates the compressor.
  • Ceramic, water lubricated bearings for long life and high reliability.

 

High Efficiency

  • Water seals the clearances effectively for low energy consumption (up to 15% less than dry screw) and no air flow is wasted to seal vent.
  • As the water absorbs the heat from the air during compression, the compressor achieves nearly ideal isothermal compression for optimal efficiency. Direct drive of the air end improves the efficiency and low energy consumption.
  • Advanced proprietary profile is machined to high precision (vs. mold-casted polymer rotors) for high efficiency and low energy consumption.
  • Save an additional 30% to 35% of energy cost with optional Variable Speed Driven ZWV.

 

Low Cost Service

  • Oil-less design requires no oil changes, oil filters, oil separator element changes, or costly disposals of oil filters and the ZW air end does not require high cost rebuilds like dry screws.
  • Oil leaks or discharges into the environment requiring costly repairs are avoided, and no need for high maintenance oil-water separation system.
  • Less down time due to easy and fast service.
  • Lower Life Cycle Cost (LLC) with Variable Speed Driven ZW Compressors.

 

High Reliability

  • Low operating speed (3,550 max) vs. dry screw oil free compressors which can run up to 40,000 rpm. The 3,550 max rpm means low bearing loads for long bearing life, increasing reliability and decreasing the risk of down time.
  • Low operating temperature does not subject the unit to high heat loads (vs. 500-600 F for dry two-stage oil free units).
  • Simple construction with ceramic bearings gives you high reliability and less risk of down time.

 

High Quality Air

  • Totally oil-less, cool and contaminant free air.
  • Water is easy to separate and remove, unlike oil, which is more difficult to remove.
  • Water injected to the unit filtered in several phases and automatically replaces every 100 hours to ensure cleanliness.
  • Stainless steel and bronze alloy non-corroding components with no Teflon or other coating material to wear and contaminate the air stream.

 

 

About FSI
Since CZPT was founded in 1953, it has transformed from a small ZheJiang ese company to a regional manufacturing enterprise, taking root in China and various Southeast Asian countries such as Malaysia, Thailand, Indonesia and Vietnam. The company was initially built from the ground up, and it overcame daunting challenges to gain a foothold in ZheJiang , where it specialized in overhauling all types of air compressors made in European countries, the United States of America, and Japan. Over the years, CZPT expanded its reach to Europe and North America through mergers and acquisitions, allowing it to become 1 of the most globalized manufacturing groups in the compressor field. CZPT attributes its growth and persistence to its commitment to meet the mission, “Pursuing CZPT and Enriching Life”, as embraced by its founder, Mr. Hou-Teng Lee. As the company continues to grow, it aims to create products and services that are not only competitive in the international market, but also meet the requirements for better environmental protection, energy efficiency, high-quality, and customer satisfaction. With Fusheng’s leading edge and patented R&D technology, automated production equipment, global distribution channels, and integrated global resources, CZPT is equipped to provide a full and complete product line.

Bestrand is a leading supplier of compressed air system. Past 10 years, we established very good partnership with FUSHENG. We have provided all kinds of products from CZPT include air compressor, after treatment, spare parts to customers all over the world. Pls feel free to contact us for a quote. 

 

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
air-compressor

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China Hot selling CZPT ZW Series Water Injected Oil Free Screw Air Compressor ZWV15A     near me manufacturer China Hot selling CZPT ZW Series Water Injected Oil Free Screw Air Compressor ZWV15A     near me manufacturer

Recent Posts