Product Description
Product Description
Permanent Magnet Frequency Conversion Screw Compressor
- Tuowei PM Frequency Conversion Screw Compressor saves 10%-15% energy more than variable speed screw compressor, while it saves 30%-40% more than standard screw compressor.
- High Efficiency PM Motor. With the highperformance permanent magnet material, PM motor won’t lose magnetism even under 120ºC and can run for more tha n 15 years. No motor bearing: permanent magnet rotor is installed directly on the stretch out shaft of male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault.Comparing to normal variable speed motor, the permanent magn et synchroous motor performs with even better energy efficiency.Especially in the low-speed condition, it can still maintain a high motor efficiency.
Technical Data:
| Model | SGPM (Low Pressure) | |||
| Type of Cooling | Air Cooling/Water cooling | |||
| Working Pressure | psig | 43.7 ~ 72.8 | ||
| bar | 3~5 | |||
| m3/min | 8.24~ 39.83 | |||
| Motor Power | kw/hp | 37~132 | ||
| Starting Mode | Variable frequency | |||
| Type of Driving | Driect driven | |||
| Voltage | 380V / 3PH / 50HZ / 60HZ 220V / 3PH / 50HZ / 60HZ 440V / 3PH / 50HZ / 60HZ 415V / 3PH / 50HZ / 60HZ Can be customized |
|||
| Exhaust Oil Volum | <3ppm | |||
| Noise | db | 67±2 | ||
| Outlet Air Humidity | ºC | ambient temperature+15ºC | ||
Significant energy saving effect
Permanent magnet synchronous variable air compressor is always running in the loaded state, no uninstall run phenomenon, and this no power wastage. Permanent magnet synchronous motor efficiency is very high compared with ordinary motor efficiency by at least 2%, with less power consumption and greater output torque, energy-saving effect is remarkable, fee energy consumption remained at the level of the most economical.
Introduction of permanent magnet synchronizing variable frequency compressor
The permanent magnet synchronizing variable frequency compressor is a most recent compressor with excellent quality and high efficiency and energy saving at present. It is an advanced technique owned by only a few advanced countries and zones in the world. It is a high-end tendency for the future compressor development. The design concept and technical measure has broken through the tradition technical concept. It integrates the most sophisticated and energy saving technical factors.
Strong support of frequency converter to compressor
The permanent magnet synchronizing variable frequency compressor is equipped with special frequency converter with wider frequency converting rang. With the rapid development of techniques, the variable frequency compressor has become a high-grade machine in the energy saving area. It can realize maximum energy saving effect with the permanent magnet synchronizing motor.
Product Parameters
Technical parameters of low pressure permanent magnet variable frequency screw air compressor
| Model | Capacity | Pressure | Spssd | Pipe Diameter | Weight | Noise | Dimensions |
| m3/min | bar | rpm | KGS | Db(A) | L*W*H mm | ||
| SGPM 37 | 11.02 | 3 | 3050 | 2″ | 920 | 67±2 | 1750*1200*1500 |
| 9.36 | 4 | 2600 | |||||
| 8.24 | 5 | 2300 | |||||
| SGPM 45 | 10.80 | 4 | 3000 | 2″ | 950 | 67±2 | 1750*1200*1500 |
| 10.02 | 5 | 2800 | |||||
| SGPM 55 | 17.30 | 3 | 2600 | 2″ | 1150 | 67±2 | 1750*1200*1500 |
| 15.34 | 4 | 2300 | |||||
| 13.31 | 5 | 2000 | |||||
| SGPM 75 | 23.01 | 3 | 3100 | DN65 | 2850 | 70±2 | 2500*1600*1800 |
| 19.71 | 4 | 2940 | |||||
| 17.97 | 5 | 2700 | |||||
| SGPM 90 | 22.14 | 4 | 3000 | DN65 | 2950 | 70±2 | 2500*1600*1800 |
| 20.67 | 5 | 2800 | |||||
| SGPM 110 | 34.07 | 3 | 2400 | DN100 | 3800 | 72±2 | 3000*1600*1900 |
| 29.48 | 4 | 2100 | |||||
| SGPM 132 | 39.83 | 3 | 3000 | DN100 | 4000 | 72±2 | 3000*1600*1900 |
| 35.20 | 4 | 2800 |
Technical parameters of low pressure permanent magnet two-stage variable frequency screw air compressor
| Model | Power | Capacity | Pressure | Pipe Diameter | Weight | Noise | Dimensions |
| KW/HP | m3/min | bar | KGS | Db(A) | L*W*H mm | ||
| SGPM 37II | 37/50 | 9.69 | 4 | RP2 | 1700 | 67±2 | 2100*1300*1550 |
| 9.39 | 5 | ||||||
| SGPM 45II | 45/60 | 12.20 | 4 | RP2 | 2000 | 69±2 | 2100*1300*1550 |
| 11.51 | 5 | ||||||
| SGPM 55II | 55/75 | 15.25 | 4 | RP2 | 2300 | 69±2 | 2100*1300*1550 |
| 14.50 | 5 | ||||||
| SGPM 75II | 75/90 | 19.50 | 4 | DN80 | 2800 | 70±2 | 2500*1600*2000 |
| 19.00 | 5 | ||||||
| SGPM 90II | 90/120 | 22.42 | 4 | DN80 | 3000 | 70±2 | 2500*1600*2000 |
| 24.07 | 5 | ||||||
| SGPM 110II | 110/150 | 28.00 | 3 | DN80 | 4000 | 72±2 | 2500*1600*2000 |
| 27.45 | 4 | ||||||
| SGPM 132II | 132/175 | 38.82 | 3 | DN100 | 5000 | 72±2 | 3000*2000*2200 |
| 35.23 | 4 | ||||||
| SGPM 160II | 160/200 | 44.07 | 3 | DN100 | 5800 | 72±2 | 3000*2000*2200 |
| 41.20 | 4 | ||||||
| SGPM 185II | 185/250 | 50.58 | 3 | DN125 | 7000 | 72±2 | 3000*2000*2200 |
| 45.78 | 4 | ||||||
| SGPM 200II | 200/270 | 56.00 | 3 | DN125 | 7500 | 72±2 | 3000*2000*2200 |
| 50.46 | 4 |
Company Profile
FAQ
Q1: What is the rotor speed for the air end?
A1: 2980rmp.
Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.
Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.
Types of Air Compressors
There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
Air Compressors
Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
Single-stage models
When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.
Low-noise models
Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
Oil-free models
A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.
